For an ISO 45001 audit, you need to show that everyone working in a safety-critical role is competent and authorised: the requirements of the role, the training completed, authorisations that are still valid, and sign-off on the job. This evidence covers permanent employees, but also agency workers and contractors working on site.

What does an ISO 45001 auditor check on competence and authorisations?

An ISO 45001 auditor checks that the organisation has defined the competence needed for every role that affects health and safety, that the people concerned actually have it, and that documented information is retained as evidence. The auditor also looks at how contractors are controlled and how aware teams are of hazards.

A surveillance audit

The standard is widely adopted: according to the ISO Survey 2022, nearly 400,000 ISO 45001 certificates were in force worldwide. Consider a typical situation. At a chemical plant classified as a COMAH site, the HSE manager is preparing for a surveillance audit in three weeks. She knows the auditor will pick a few names at random: an agency forklift driver who started on Monday, a contractor's technician working in a hazardous area, a loading operator. For each one, she will need to show within minutes what the role requires, what the person holds and until when. An expired authorisation gives no warning: the audit is often when a missing piece of evidence comes to light.


Competence, training, authorisation: what is the difference for the auditor?

For the auditor, training is a means, competence is an outcome and an authorisation is permission granted by the employer. A training certificate alone therefore does not prove that an operator has mastered the role: the auditor also expects sign-off on the job and, for high-risk tasks, a valid written authorisation.

Three levels of evidence

An attendance sheet shows that a forklift driver attended a session; it does not show that he drives safely in the aisle where flammable products are stored. An accredited lift truck certificate confirms that the driver passed the tests, but it is the written authorisation signed by the employer that allows him to operate on site. Likewise, under the Electricity at Work Regulations 1989, completing electrical safety training does not make someone an authorised person: the employer appoints them in writing. During the audit, these three levels of evidence must be readable together, for each person and each role. This is exactly what a competence and authorisation matrix makes visible at a glance.


What evidence should you prepare for permanent employees?

For permanent employees, the evidence to prepare follows each person's journey: the job description and its requirements, initial and statutory training, authorisations with their expiry dates, sign-off on the job by a mentor or team leader, and refresher training already completed or scheduled.

Scattered evidence

At this plant, all of this evidence exists, but it is scattered. Certificates sit with the training provider or in the LMS, signed authorisations in a binder in the HSE office, and on-the-job sign-offs in team leaders' notebooks. On audit day, the challenge is less about producing new evidence than about quickly finding what already exists and showing that it is consistent. An operator authorised in 2023 and moved to another unit in 2025 needs evidence that matches the current role. The auditor also looks at upcoming expiry dates: a refresher booked before the deadline shows that monitoring is under control, not just up to date.


How do you prove the competence of agency workers on audit day?

To prove the competence of an agency worker, you need to show the safety induction carried out on arrival, any job-specific safety training for a high-risk role, the certificates checked before the first assignment (lift truck, electrical) and the authorisation issued by the host employer. This evidence must exist from the first day of the assignment.

The agency forklift driver

Agency workers deserve particular attention: in France, the national occupational health insurer's 2024 annual report shows that their accident frequency rate remains nearly twice the national average. At this plant, the forklift driver who started on Monday illustrates the difficulty. The agency checked his lift truck certificate, but the copy never reached the HSE office, and his written authorisation to operate has not yet been signed. Nothing is wrong on the shop floor, since he works alongside an experienced colleague, but nothing can be proven either. For an auditor, the rule is simple: what is not documented at the time of assignment has not been checked.


What evidence should you ask contractors for?

For a contractor, the expected evidence is the signed risk assessment and method statement, the named list of people on site, the authorisations required for the work (electrical, hazardous areas, confined spaces, work at height) with their validity, and a record of the site safety induction. The host organisation remains responsible for controlling these contractors.

Checking before the permit to work

On a COMAH site, this is often where nonconformities cluster. The maintenance technician working in a hazardous area is employed by a service provider, which tracks his authorisations. Yet it is the site that must be able to show it checked these documents before issuing the permit to work. Evidence often arrives by email, attached to a job pack, and is then lost once the job is finished. A good practice is to include regular contractors in the same matrix as site employees, alongside the site's own requirements. Reception and the audit team then both know who can work on site, and until when.


How does the auditor choose which records to check?

An ISO 45001 auditor works by sampling: the auditor picks a few roles and a few people, often out on the shop floor, then traces back to the evidence. An operator met at a workstation, a permit to work in progress or a recent incident can all serve as a starting point. Records must therefore hold up for any name.

What the auditor tests

This method explains why preparation focused on the most presentable files weakens the outcome. The auditor may ask a loading operator which hazards he knows on his workstation, then check that the matching training is recorded and current. The auditor may also start from an incident reported the previous month and ask who was authorised for the task. In both cases, the test is whether what the shop floor says matches what the documents show. For the HSE manager, the question to ask is therefore not "are my files complete?" but "can I answer for anyone on site today?".


The 10-point "audit-ready" checklist

The "audit-ready" checklist brings together ten checks that allow you to answer an ISO 45001 auditor on competence and authorisations, for anyone on site. It covers employees, agency workers and contractors, and is kept up to date continuously rather than the evening before the audit.

No.What to checkEvidence expected
1Requirements defined per roleJob description or matrix
2Statutory training completedDated certificates
3Valid authorisationsSigned authorisation, expiry
4On-the-job sign-offAssessment by the mentor
5Refreshers scheduledBookings before expiry
6Agency workers checked on arrivalCertificates and induction
7Contractors under controlRAMS, authorisations
8Hazard awarenessInduction, toolbox talks
9Nonconformities addressedRecorded corrective actions
10Evidence found within minutesUp-to-date, shared matrix

Each line can be checked for any name the auditor chooses, on the day itself.


How do you move from audit preparation to continuous audit readiness?

Continuous audit readiness means recording each piece of evidence when it is produced (training, authorisation, on-the-job sign-off, agency worker induction) in a shared matrix that calculates expiry dates. Audit preparation then becomes a quick check instead of several days spent gathering documents.

The same plant with Klara

Let us return to the same plant, this time with Klara. The training certificate is added to the matrix as soon as the session ends, the team leader signs off the practical assessment on a tablet, and the agency forklift driver's arrival triggers a check of his lift truck certificate and written authorisation. Upcoming refreshers appear three months before expiry, with a suggested session. Three weeks before the audit, the HSE manager filters the matrix on high-risk roles and spots two authorisations to renew, which she deals with straight away. On the day itself, she answers the auditor by opening the profile of the person requested, with the evidence attached.


How does the ISO 45001 audit fit with other inspections on site?

The ISO 45001 audit fits with other inspections on site because the same evidence of competence is used several times: COMAH inspections by the HSE and the Environment Agency, IATF 16949 audits in automotive, GMP inspections in pharmaceuticals, and visits from health and safety inspectors. A single matrix avoids rebuilding a different file for each one.

In Great Britain, the HSE recorded 124 workers killed in work-related accidents in 2024/25: these inspections exist first and foremost to protect people. At a chemical plant, the regulator looks at the competence of operators assigned to safety-critical barriers, while the ISO 45001 auditor looks at the system as a whole. For sector-specific requirements, read our articles Multi-skilling matrix and IATF 16949: what the auditor checks, and what the matrix should also tell you, and GMP personnel qualification: how to be inspection-ready without a week of preparation? To choose a tool, read Authorisation tracking software: 10 questions to ask before moving off Excel.