When someone returns to work after a long-term absence, three things need rechecking before they go back on the job: their medical situation (return-to-work medical check, medical clearance), any certificates that expired during the absence, and the skills that fade without practice, such as some welding qualifications or procedures updated in the meantime.
Why does a long absence weaken the right to carry out a task?
A long absence weakens the right to carry out a task because authorisations keep ageing while the employee is away. Certificates expire, qualifications lapse without practice and site rules change. On the day the person returns, the skills matrix often still shows the situation before they left, not the situation today.
What happens on the Monday of the return?
On the Monday of the return, bringing back someone who has been away for several months often happens in a rush. Picture a typical situation at a high-hazard chemical site: a pipe welder from the maintenance team comes back after seven months of sick leave. The team leader puts the welder straight onto a steam line replacement planned for Wednesday. The day before, the HSE manager discovers that the welder's qualification has not been confirmed for eight months, that the ATEX training expired during the absence and that the hot work permit procedure has been revised. The welder was ready to work again: the right to carry out the job was not.
Which authorisations can expire during an absence?
The authorisations that expire during an absence are those whose expiry date falls between departure and return, and that nobody was able to renew. An electrical authorisation, ATEX training, a first aid at work certificate or a licence to operate lift trucks can all lapse quietly in this way. An expired authorisation gives no warning: as long as the matrix does not compare absence dates with expiry dates, the gap stays invisible. The returning employee may then be assigned to a task they are no longer authorised to carry out, without anyone noticing.
How many employees does this affect?
The number of employees returning to work after a long-term absence has been rising for several years. According to the Malakoff Humanis absenteeism barometer published in 2026, the absence rate in the French private sector reached 4.3% in 2025, up 25.5% on 2019, a rise driven by longer periods of sick leave. Industry is the third most affected sector. The insurer Apicil puts the 2025 rate at 4.68%, with absences of more than 90 days accounting for over half of it. On a site employing several hundred people, these returns are therefore a regular event rather than an exception.
What do the rules say about returning to work after a long-term absence?
In France, the rules mainly cover the medical side of returning to work after a long-term absence: a return-to-work check with the occupational physician depending on the length and cause of the absence, an optional keeping-in-touch meeting during the absence, and medical clearance for electrical authorisations and lift truck licences.
When is a return-to-work medical check mandatory?
In France, a return-to-work medical check is mandatory after maternity leave, after at least 30 days off following a workplace accident, and after at least 60 days off for a non-work-related illness or accident. The 60-day threshold was set by decree no. 2022-372 of 16 March 2022, for absences starting on or after 31 March 2022. Arranged by the employer, the check takes place within eight days of the return. The occupational physician checks that the job is compatible with the employee's health and can recommend adjustments, much like the fit note process familiar to UK employers. It says nothing, however, about whether certificates are still valid. Under decree no. 2026-503 of 12 June 2026, for sick notes issued from 15 June 2026, the check is no longer required if the employee had a pre-return check in the 30 days before going back and the occupational physician recommended no adjustment to the job or to working time, unless the physician, the employer or the employee asks for one.
What has medical clearance changed?
Medical clearance, a certificate confirming there is no medical reason against the task, has replaced enhanced health monitoring in France since 1 October 2025 for holders of an electrical authorisation or a lift truck licence. Introduced by decree no. 2025-355 of 18 April 2025, it is issued by the occupational physician after an examination and remains valid for five years. For an employee coming back from a long-term absence, two points need checking: that the clearance is still valid, and that the return-to-work check has not set restrictions incompatible with the planned tasks. If it has, the employer must review the authorisation before any assignment.
Which skills fade without practice?
The skills that fade without practice are those whose validity depends on regular use: some special process qualifications, knowledge of procedures that have changed, and fine hands-on technique. They have no visible expiry date in a spreadsheet, which makes them easy to overlook when someone returns to work after a long absence.
Qualifications that depend on continuous practice
Qualifications that depend on continuous practice remain valid as long as the employee keeps using the process, and lapse after too long a break. Welder qualifications under ISO 9606-1 are a good example: every six months, the welding coordinator confirms that the welder has worked within the scope of the qualification, and a break of more than six months generally invalidates it. A seven-month absence therefore means a new qualification test before the welder can work on a live installation again. Other special processes follow similar logic. This is why the matrix should separate certificates with a fixed expiry date from qualifications maintained through practice.
Procedures and equipment that have changed
Procedures and equipment that have changed during the absence create another gap, one that is often underestimated. In seven months, an industrial site revises instructions, modifies a line, switches a product or replaces equipment. The returning employee knows the site as it was when they left. A guided read-through of the revised procedures, recorded with its date, closes this gap and provides evidence for audits. For the HSE manager, the list of documents updated since the employee's departure is the simplest starting point: it avoids a full review and targets what has really changed on site.
What should be checked, and by whom, before someone goes back on the job?
Before someone goes back on the job, the check covers six items: the return-to-work medical check, medical clearance, expired certificates, practice-based qualifications, updated procedures and hands-on technique at the workstation. Each item has an owner and a piece of evidence to keep, so that the whole burden does not fall on the team leader.
The return-to-work grid below provides a starting point for a frontline employee coming back from a long-term absence on an industrial site.
| Item to recheck | What may have changed during the absence | Who checks | Evidence to keep |
|---|---|---|---|
| Return-to-work medical check | Restrictions or adjustments to the role | HR, with the occupational physician | Return-to-work opinion, or pre-return opinion if exempted |
| Medical clearance | Clearance that has reached the end of its five years | HSE manager | Valid clearance certificate |
| Certificates with a fixed expiry date | Expired electrical authorisation, ATEX, first aid or lift truck licence | HSE manager | New certificate or scheduled refresher date |
| Practice-based qualifications | Welding qualification lapsed after six months without practice | Welding or special process coordinator | New test result |
| Procedures and equipment | Revised instructions, replaced equipment | Team leader | Dated guided read-through |
| Hands-on technique | Loss of confidence, new production rates | Team leader or mentor | Sign-off at the workstation |
How do you adapt the grid to the length of the absence?
The grid adapts to the length of the absence, because not every return calls for the same level of checking. Below 30 days, reviewing the expiry dates that fell during the absence is usually enough. Between 30 and 60 days, add the read-through of updated procedures and, depending on the cause, the return-to-work medical check. Beyond 60 days, and especially beyond six months, the full grid applies, with particular attention to practice-based qualifications. These thresholds are guidelines only: the HSE manager adjusts them according to how critical each role is.
How do you prepare the return during the absence rather than on the first day back?
Preparing the return during the absence means identifying, as soon as the return date is known, the certificates and qualifications that will no longer be valid, then scheduling refreshers, tests and read-throughs before the first day. The employee then comes back to a clear plan, instead of discovering the gaps one by one during the week.
Compare the return date with the authorisation matrix
Comparing the return date with the authorisation matrix shows, before the employee comes back, what will block their assignment. In Klara, the matrix displays each employee's certificates, their expiry dates and the qualifications that must be maintained through practice. The manager filters on a return date, sees what will no longer be valid on that day and books a refresher or a test. In France, a keeping-in-touch meeting, possible from 30 days of absence, offers a chance to discuss this with the employee, on a voluntary basis and without touching on their health.
Organise a phased return to the job
A phased return organises the first week or two around the remaining checks. The employee starts with the tasks still covered by valid certificates, completes refresher training, then carries out their first sensitive jobs alongside a mentor. The team leader then signs off their hands-on technique at the workstation, and the matrix is updated with that sign-off. This plan makes the return safe without leaving the employee waiting around, with no clear role, during the first few days back at work.
The role of the line manager
The line manager plays a central role when someone returns to work after a long-term absence, because they know both the job and the person. Their role is to welcome the employee back, explain what has changed and make the path to a full return to the job visible. The grid helps them do this without improvising, and the matrix data supports that progress: it is not there to monitor the returning employee. A check-in at the end of the first week makes it possible to adjust the plan if needed.
Where should a site start to make returns safer?
To make returns safer on a site, the simplest approach is to start with employees who are currently absent for more than 30 days. Compare their expected return date with the authorisation matrix, apply the return-to-work grid, then turn this check into a monthly routine shared between HR, the HSE team and line managers.
Connect returns to other authorisation projects
Returns after a long-term absence connect naturally with the HSE team's other authorisation projects, and benefit from the same tools and routines. The logic of alerts before expiry is set out in "How do you automate authorisation management on site?", and the evidence to keep matches that described in "ISO 45001 audit: what evidence of authorisation and competence should you prepare?". For technicians who work on client sites, "Authorisation matrix for mobile technicians: how do you prove who can work on site, at your premises or a client's?" completes the approach. Finally, "Skills matrix: definition, examples and a method to move from completion to steering" places the return to the job within the wider management of skills.
Four steps for a first month
A first month is enough to set up return-to-work checks on an industrial site, without any additional tool at the outset and without reorganising teams.
List employees absent for more than 30 days and their expected return date.
Compare these dates with the expiry dates in the authorisation matrix.
Apply the return-to-work grid to each return, with an owner for each line.
Measure the time between the return and the first full assignment to the job.